|
 DTH Button Bits
|
BIT SHANK STYLE |
BIT HEAD SIZE RANGES
(INCHES) |
FACE DESIGN |
|
PANTHER/DHD4/DHD14/ MAC4/DHD340/QL40/ SD4 |
4 – 6.5 |
FLAT , CONCAVE,
CONVEX |
|
DHD16/BISON |
6 – 10 |
- |
|
DHD360 / DHD160/ COP62/ SD6
B5325/QL60/MEGA/DIGGER |
6 – 10 |
- |
|
SD8/ DHD380/GLADIATOR |
8 – 12 |
- |
|
SD10/D10 |
10 – 14 |
- | | KLR Hole Opener Bits
|
A hole opener is a spacialised tool used to enlarge an existing size hole. KLR uses only the highest grade of steel in producing our superior line of Hole openers. Form 6 to 20 with whatever Pilot Hole Need, with KLR Hole opener you will always know that it was produced with the quality you have come to expect from all KLR products. Built with the shanks to fit all popular brand of hammers.
KLR Hole openers will give you hour after hour of trouble free drilling. |
|
Available Sizes |
 |
8.0" X 12 1/4" |
 |
| |
8.0" X 14.0" |
| |
8.0" X 16.0" |
| |
10.0" X 16.0" |
| |
10.0 X 20.0" | | U DEX Bits
|
Available Sizes |
| |
4.5" X 6.5" |
| |
6.0" X 8.0" |
| |
6.5" X 8.5" |
| |
8.0" X 10.0" | | Drag Bits
Rotary type Drag Bits are used for the same manner and for the same purpose as milled tooth Rock Bits, except that they are limited to softer formations generally. They are, in most cases cheaper than Rock Bits. The cutting profile may be flat, chevron or stepped according to application. They may be used in air or fluid flush.
When ordering Drag bits please ensure that the following information is clearly provided:
 |
Formation to be drilled |
| |
Flushing medium (air or fluid) |
| |
Profile of bit (flat, chevron or stepped) | |
|
Size |
Type Pin |
|
4 7/8 - 5 1/8 |
2 3/8 API |
|
5 1/4 - 5 1/2 |
2 3/8 API |
|
5 5/8 - 6 |
2 3/8 API |
|
6 1/8 - 6 1/4 |
2 3/8 API |
|
6 ½ - 6 1/4 |
2 3/8 API |
|
6 7/8 - 7 7/8 |
3 1/2 API |
|
7 7/8 - 8 7/8 |
4 1/2 API |
|
8 - 9 |
3 1/2 API |
|
9 - 9 7/8 |
4 1/2 API |
|
9 1/8 - 10 7/8 |
3 1/2 API |
|
10 - 10 7/8 |
3 1/2 API or 4 1/2 API |
|
11 - 12 1/4 |
3 1/2 API or 4 1/2 API | |
| |
 |
Tricone Rock Roller Bits
|
Available Sizes |
| |
TC Rock Roller Bits: 7 7/8 to 14 1/2 |
| |
Milled Tooth Rock Roller Bits: 7 7/8 to 14 1/2 |
Drifter Bits R32 Thread
 |
| |
| Diameter |
Part No. |
No. of Buttons |
Button X Button Dia |
Flushing Holes |
| MM |
Inch |
R32 Thread |
|
Guage |
Centre |
Side |
Centre |
|
41 |
1 5/8 |
100-5041-27 |
7 |
5X9 |
2X8 |
1 |
1 |
|
41 |
1 5/8 |
100-5041-56 |
6 |
4X9 |
2X9 |
2 |
1 |
|
43 |
1 11/16 |
100-5043-27 |
7 |
5X9 |
2X9 |
2 |
1 |
|
45 |
1 3/4 |
100-5047-27 |
7 |
5X11 |
2X8 |
2 |
1 |
|
45 |
1 3/4 |
100-5045-37 |
9 |
6X9 |
3X8 |
1 |
3 |
|
45 |
1 3/4 |
100-5045-37 |
9 |
6X10 |
3X8 |
1 |
3 |
|
48 |
1 7/8 |
100-5048-27 |
7 |
5X11 |
2X9 |
2 |
1 |
|
48 |
1 7/8 |
100-5048-37 |
9 |
6X10 |
3X8 |
1 |
3 |
|
51 |
2 |
100-5051-27 |
7 |
5X11 |
2X10 |
2 |
1 |
|
51 |
2 |
100-5051-37 |
9 |
6X10 |
3X9 |
1 |
3 |
|
64 |
2 1/2 |
100-5064-49 |
12 |
8X10 |
4X10 |
_ |
2 |
|
76 |
3 |
100-5075 |
12 |
8X10 |
4X11 |
_ |
2 | | |
